Aircraft Parts & Supplies

allkleergallon All Kleer plastic windshield cleaner The Ultimate Plastic Windshield Cleaner @ Polish for Airplanes Owners of airplanes rely on All Kleer to keep their plastic windshields free of dirt and grime, on the ground and up in the clouds. The...

Aviation spark plugs have special needs. They use a non-standard 7/8" hex, and exhaust manifolds can get in the way of wrench access. A thin-wall socket is necessary for many applications. And to ensure compatibility with all makes of plugs including...

The Pilot's Tool Kit includes the most common tools needed to complete basic maintenance for when you're away from an FBO with a maintenance department. It includes a set of combination wrenches, an 8 inch adjustable wrench, a tire pressure gauge,...

Inspect any A&P’s tool box and you’ll find safety wire pliers. Often referred to as SWIPES (for “Safety Wire Installation Pliers”), they ease the operation of twisting wire that firmly secures fasteners and other parts. The...

Kit to service the 60-5 parking brake valve. Contains 7 O-rings.

TCBM-8KCAB brake master cylinder kit for the American Champion Aircraft 8KCAB and 8GCBC models with Cleveland 10-54 master cylinders.

American Champion Citabria stainless kit. Contains stainless hardware to replace worn rusty hardware in non structural areas such as inspection plates and fairings. The kit is assembled with all approved hardware.

American Champion Explorer stainless kit. Contains stainless hardware to replace worn rusty hardware in non structural areas such as inspection plates and fairings. The kit is assembled with all approved hardware.

American Champion Scout stainless kit. Contains stainless hardware to replace worn rusty hardware in non structural areas such as inspection plates and fairings. The kit is assembled with all approved hardware.

American Champion Super Decathlon stainless kit. Contains stainless hardware to replace worn rusty hardware in non structural areas such as inspection plates and fairings. The kit is assembled with all approved hardware.

Replacement AML Bulb 1495 - 28.0 Volt .30 Amp. T-4 1/2 Miniature Bayonet Specifications Filament Shape: C-2R MSCP: 6.0 Average Life: 500 Hours Maximum Overall Length: Appr. 1.38"

Replacement Bulb - Miniature Bayonet - AML 1815 Specifications Size T-3 1/414.0V.20 AMPS

Replacement Bulb - Miniature Bayonet - AML 44 Specifications Size T-3 1/46.3V.25 AMPS

AN 176-13A Undrilled Close Tolerance Bolt Used on Piper Wing Spars Order the MS2102-6 Nuts to go with this if it is for the Piper wing spar AD

AN7-27A Bolt Undrilled shank Dimensions (L x W x H) 5.13 x 2 x .69 IN    

AN7-35 Bolt Drilled Shank Dimensions (L x W x H) 3.94 x .69 x .69 IN    

AN7-35A Bolt Undrilled shank Dimensions (L x W x H) 3.94 x .69 x .69 IN    

AN7-45A Bolt Undrilled shank Dimensions (L x W x H) 5 x .69 x .69 IN    

Tube O.D. 1/4" Aluminum - Blue

SPECIFICATIONS• Series: AN3• Diameter: 0.189 to 0.186 in• Thread Length: 0.406 in• Thread Type: UNF• Head Diameter: 0.43 in• Head Height: 0.109 to 0.141 in• Head Type: Hexagonal• Thread Size: #10-32• Grip...

  TECHNICAL INFORMATION• FAA-STD ApprovedSPECIFICATIONS• Diameter: 1/4 in• Dash Number: 23• Thread Length: 0.468 in• Length: 2-13/32 in• Thread Type: UNF• Head Diameter: 0.51 in• Head Height: 0.14 to 0.172...

Nominal Length: 3-7/32 Grip Length: 2-11/16 Shank: Undrilled Cadmium Plated Type a description for this product here...Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The...

AN526 stainless truss head machine screw assortment. 350pc stainless hardware kit containing AN526 truss head machine screws. Our kit contains the following: 25EA AN526C632R6, 100EA AN526C632R8, 25EA AN526C632R10, 100EA AN526C832R8, 25EA AN526C832R10,...

Nominal Length: 3-31/32 Grip Length: 3-5/16 Shank: Drilled Cadmium Plated Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after...

Nominal Length: 4-23/32 Grip Length: 4-1/16 Shank: Drilled Cadmium Plated Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after...

AN901-5A Crush Gasket Fits most strut valves  

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in...

APS Brake Lining Kit (4 Linings & 12 Rivets)

Pack of 100 APS Brake Pad Rivets APS105-00200 for Organic lining.

Pack of 100 APS Brake Pad Rivets APS105-00200 for Organic lining.

APS BlackSteel offers semi-metallic (organic) and metallic linings for your specific application. The semi-metallic linings are impregnated with Kevlar® fibers for optimum performance.APS metallic linings are constructed from an innovative...

Overview APS brake discs are state-of-the-art CNC machined from a one-piece forging. When the metal is forged it creates a directional grain flow that follows the contour of the disc. This allows for a much stronger disc that has a reduced risk...

APS BlackSteel offers semi-metallic (organic) and metallic linings for your specific application. The semi-metallic linings are impregnated with Kevlar® fibers for optimum performance.APS metallic linings are constructed from an innovative...

APS BlackSteel offers semi-metallic (organic) and metallic linings for your specific application. The semi-metallic linings are impregnated with Kevlar® fibers for optimum performance.APS metallic linings are constructed from an innovative...

APS BlackSteel offers semi-metallic (organic) and metallic linings for your specific application. The semi-metallic linings are impregnated with Kevlar® fibers for optimum performance.APS metallic linings are constructed from an innovative design and...

APS BlackSteel offers semi-metallic (organic) and metallic linings for your specific application. The semi-metallic linings are impregnated with Kevlar® fibers for optimum performance.APS metallic linings are constructed from an innovative...

APS BlackSteel offers semi-metallic (organic) and metallic linings for your specific application. The semi-metallic linings are impregnated with Kevlar® fibers for optimum performance.APS metallic linings are constructed from an innovative design and...

APS BlackSteel offers semi-metallic (organic) and metallic linings for your specific application. The semi-metallic linings are impregnated with Kevlar® fibers for optimum performance.APS metallic linings are constructed from an innovative...

APS BlackSteel offers semi-metallic (organic) and metallic linings for your specific application. The semi-metallic linings are impregnated with Kevlar® fibers for optimum performance.APS metallic linings are constructed from an innovative...