Plane Parts

Brake Master Cylinder Kit for Cessna 310 through 310D

10-24D Mooney M20J M20M brake master cylinder kit. Our Mooney brake master cylinder kit contains the required orings to service the Cleveland 10-24D brake master cylinder.

10-54 American Champion 8KCAB 8GCBC brake master cylinder kit. Our kit has all the required orings to service the 10-54  brake master cylinder.

110-3-16 / 494-177 dyna-seal. The 494-177 / 110-3/16 dyna-seal for the Gar Kenyon brake master cylinders. These are used in the 455-944 / 17000 and the 455-966 / 95061-00 master...

145-58012 series Navion hydraulic power and control unit kit

2682001-1 -3 brake master cylinder kit.  Our PPBMC2 replaces old, worn and leaking O-rings and seals in your 2682001-1, -3 brake master cylinder on the Cessna 208 Caravan.

3200 / 145-58020 Navion Hydraulic pump kit. Our PPACC3 hydraulic pump seal kit for Navion models replaces worn and leaking O-rings.

3600 / 145-58027 Navion hydraulic lift valve kit. Our PPACC4 for Navion models with the 3600 / 145-58027 hydraulic lift valve. Replace worn or leaking O-rings with our seal kit.

455-931 brake master cylinder kit.  Our PPBMC10 replaces old, worn and leaking O-rings and seals in your 455-931 / 10-19 master cylinder on the PA24-260 and PA30 models.

455-944 / 17000 brake master cylinder kit .  Our PPBMC42 replaces old, worn and leaking O-rings and seals in your 455-944 / 17000 Gar-Kenyon master cylinder on the Piper PA28 and other models...

462-056  is a replacement for the Piper fuel tank cap gasket. 3″ OD, 2″ ID and 1/16″ thick. Supercedes the following piper part numbers:  462-022 and 66815-000

800-001-6 / 800-0001-6 Cessna lock-o-seal. The Lock-o-seal incorporates an o-ring that sits inside a washer but is not attached. This washer seal combo is used in several Cessna brake master cylinder...