Aircraft Parts & Supplies

Aeroshell Oil W100 (Quart) AeroShell Oil W100 is an ashless dispersant oil specifically developed for aviation piston engines. They combine non-metallic additives with selected high viscosity index base oils to give exceptional stability, dispersancy and...

Aeroshell Oil W80 Plus (Case of 6 Quarts) AeroShell Oil W80 Plus introduces the anti-wear and anti-corrosion additives of AeroShell W100 Plus engine oil into a lighter, single-grade oil for use in colder climates. The anti-wear additive reduces wear on...

Aeroshell Oil W80 Plus (Quart) AeroShell Oil W80 Plus introduces the anti-wear and anti-corrosion additives of AeroShell W100 Plus engine oil into a lighter, single-grade oil for use in colder climates. The anti-wear additive reduces wear on start-up by...

AeroShell Oil W Single Grade Oils are premium ashless dispersant lubricating oils for 4-Stroke cycle certificated aircraft piston engines. They have been proven in billions of engine hours around the world, including service in fuel-injected and...

AeroShell Oil W Single Grade Oils are premium ashless dispersant lubricating oils for 4-Stroke cycle certificated aircraft piston engines. They have been proven in billions of engine hours around the world, including service in fuel-injected and...

MUST GO UPS GROUND. IF ANOTHER SHIPPING OPTION IS SELECTED, YOU WILL BE CONTACTED IF ADDITIONAL PAYMENT IS NEEDED. THANK YOU.   74-451-127. AgeMaster. AgeMaster No. 1, a rubber preservative, penetrates the surface ply of Goodrich neoprene...

  NO LONGER AVAILABLE   This FAA/PMA kit is for Airborne  pumps only.  Basic Kits include: Rotor Vanes Gasket Drive Coupling                        Deluxe...

Aircraft Jumper cables with standard 3 pin adapter.   Booster Cable (15 ft. long) With Standard 3 Pin Plug 500 Amp Clamps 4 Gauge Cable 100% pure copper stranding Twin-extruded cables for tangle-free convenience T-94 jackets, flexible to...

Stainless Steel Hardware HANDI-PAK    Keep a HANDI-PAK in your airplane or in the hangar for that missing screw or washer.   Comes with a plastic organizer case and contains the following item: 225 Total Pieces 25 #8 Flat Washers 50...

TECHNICAL INFORMATION• FAA-STD ApprovedSPECIFICATIONS• Diameter: 1/2 in• Dash Number: 42• Thread Length: 0.781 in• Length: 4-11/32 in• Thread Type: UNF• Head Diameter: 0.74 to 0.752 in• Head Height: 0.265 to 0.297...

Alcor 46150-4   4 cylinder Kit with Gauge, Leads, and Probes This kit contains: (1) Alcor 46150 EGT Gauge (4) 90 inch egt extension leads (42525) (4)  86255 Type of probe is (K)  (red and yellow)  

Alcor 46150 EGT   Size is 2 1/4 inches Type of probe is (K)  (red and yellow) Weighs only 2oz Calibration scale to 1600F  

Alcor 46151 CHT Size:   2 1/2 inch Probe:  Type K (black and Yellow) Temperature:  500F

Alcor 86255 EGT Probe Type K (red and yellow)   Alcor EGT probes are accurate +/- 25 deg at 1500 deg F. Includes fire sleeve and ring terminal hardware Clamp 3 3/8 inch maximum

Alcor TCP Dispenser Accurately mix TCP with 100LL fuel  1 oz = 30 ml1 oz/30 ml per 10 gallons of fuel

All Kleer 8oz The Ultimate Plastic Windshield Cleaner @ Polish for Airplanes Owners of airplanes rely on All Kleer to keep their plastic windshields free of dirt and grime, on the ground and up in the clouds. The super-slick "miracle finish" left by All...

allkleergallon All Kleer plastic windshield cleaner The Ultimate Plastic Windshield Cleaner @ Polish for Airplanes Owners of airplanes rely on All Kleer to keep their plastic windshields free of dirt and grime, on the ground and up in the clouds. The...

Spark plugs require a non-standard 7/8 inch hex socket with a deep well and often times a thin-wall. The American Aviator Aviation Spark Plug Socket is designed specifically to meet these needs with a combo hex and 3/8 inch drive.

The Pilot's Tool Kit includes the most common tools needed to complete basic maintenance for when you're away from an FBO with a maintenance department. It includes a set of combination wrenches, an 8 inch adjustable wrench, a tire pressure gauge,...

Inspect any A&P’s tool box and you’ll find safety wire pliers. Often referred to as SWIPES (for “Safety Wire Installation Pliers”), they ease the operation of twisting wire that firmly secures fasteners and other parts. The...

Kit to service the 60-5 parking brake valve. Contains 7 O-rings.

TCBM-8KCAB brake master cylinder kit for the American Champion Aircraft 8KCAB and 8GCBC models with Cleveland 10-54 master cylinders.

American Champion Citabria stainless kit. Contains stainless hardware to replace worn rusty hardware in non structural areas such as inspection plates and fairings. The kit is assembled with all approved hardware.

American Champion Explorer stainless kit. Contains stainless hardware to replace worn rusty hardware in non structural areas such as inspection plates and fairings. The kit is assembled with all approved hardware.

American Champion Scout stainless kit. Contains stainless hardware to replace worn rusty hardware in non structural areas such as inspection plates and fairings. The kit is assembled with all approved hardware.

American Champion Super Decathlon stainless kit. Contains stainless hardware to replace worn rusty hardware in non structural areas such as inspection plates and fairings. The kit is assembled with all approved hardware.

AN 176-13A Undrilled Close Tolerance Bolt Used on Piper Wing Spars Order the MS2102-6 Nuts to go with this if it is for the Piper wing spar AD

AN7-27A Bolt Undrilled shank Dimensions (L x W x H) 5.13 x 2 x .69 IN    

AN7-35 Bolt Drilled Shank Dimensions (L x W x H) 3.94 x .69 x .69 IN    

AN7-35A Bolt Undrilled shank Dimensions (L x W x H) 3.94 x .69 x .69 IN    

AN7-45A Bolt Undrilled shank Dimensions (L x W x H) 5 x .69 x .69 IN    

Tube O.D. 1/4" Aluminum - Blue

Nominal Length: 3-7/32 Grip Length: 2-11/16 Shank: Undrilled Cadmium Plated Type a description for this product here...Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The...

AN526 stainless truss head machine screw assortment. 350pc stainless hardware kit containing AN526 truss head machine screws. Our kit contains the following: 25EA AN526C632R6, 100EA AN526C632R8, 25EA AN526C632R10, 100EA AN526C832R8, 25EA AN526C832R10,...

Nominal Length: 3-31/32 Grip Length: 3-5/16 Shank: Drilled Cadmium Plated Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after...

Nominal Length: 4-23/32 Grip Length: 4-1/16 Shank: Drilled Cadmium Plated Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after...

AN901-5A Crush Gasket Fits most strut valves  

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in...

APS Brake Lining Kit (4 Linings & 12 Rivets)