Aircraft Parts & Supplies

Phillips X/C 20w50 (gallon).  Phillips X/C oils provide easy starting and quick lubrication under low temperature conditions. Provides film strength and low wear under high temperature conditions. Provides excellent protection against engine...

Phillips X/C 20w50 (gallon)(case).  Phillips X/C oils provide easy starting and quick lubrication under low temperature conditions. Provides film strength and low wear under high temperature conditions. Provides excellent protection against engine...

Phillips X/C 20w50 (Quart).  Phillips X/C oils provide easy starting and quick lubrication under low temperature conditions. Provides film strength and low wear under high temperature conditions. Provides excellent protection against engine...

X/C® 25W-60 is recommended for radial engines and other aviation piston engines originally designed to run on heavier-grade oils such as the military grade 120. It is re commended for use during break-in, then as operational oil to TBO. Pilots and...

Phillips X/C 25w60 (gallon). X/C® 25W-60 is recommended for radial engines and other aviation piston engines originally designed to run on heavier-grade oils such as the military grade 120. Phillips X/C oils provide easy starting and quick...

Phillips X/C 25w60 (gallon)(case). X/C® 25W-60 is recommended for radial engines and other aviation piston engines originally designed to run on heavier-grade oils such as the military grade 120. Phillips X/C oils provide easy starting and quick...

X/C® 25W-60 is recommended for radial engines and other aviation piston engines originally designed to run on heavier-grade oils such as the military grade 120. It is re commended for use during break-in, then as operational oil to TBO. Pilots and...

Aircraft Jumper cables with Piper 1 pin adapter.   Booster Cable (15 ft. long) With Piper 1 Pin Plug 500 Amp Clamps 4 Gauge Cable 100% pure copper stranding Twin-extruded cables for tangle-free convenience T-94 jackets, flexible to...

TCBM-PA24 brake master cylinder kit for the Piper PA24 Commanche series -180, -250, -260 and -400 with the Cleveland 10-5 / 455-929 master cylinders.

TCBM-PA24 brake master cylinder kit for the Piper PA24-260 and PA30 series with 10-19 / 455-931 master cylinders.

Brake master cylinder kit for the Piper PA25 series.

Piper PA25 Pawnee Stainless Screw Kit/Airframe This kit contains 1965 pieces  Saves Time and Money! Makes annual inspections a lot easier - Your mechanic will love you. Clean Appearance without those unsightly rust marks Contains all the...

Alt SKY:TCBM-PA28 brake master cylinder kit for the Piper PA28 and PA32 series with the Cleveland 10-22 / 455-938 master cylinder.

TCBM-PA32 brake master cylinder kit for the Piper PA28 and PA32 series with the Cleveland 10-30 / 455-968 master cylinder.

TCBM-PA38 brake master cylinder kit for the Piper PA38 series Tomahawk with the Cleveland 10-22 / 455-938 master cylinder.

Replace the worn o-rings in you hand brake master cylinder on the Piper PA38-112 Tomahawk series with a 455-938/10-22 master cylinder. 

Piper PA-42 series master brake cylinder o ring kit.  Everything you need to rebuild.  

Piper 63595-000 Cover This is the original equipment cover that goes over the landing gear strut valves on all Piper Aircraft.  It incorporates a locking ring that keeps it from falling off after a hard landing. Available unpainted only

SSU-016 Piper Arrow Tow Bar Total Length:  36"  This tow bar is for the Piper PA-28R series aircraft. It will also fit Piper Lance, Seminole, and Malibu although shorter in length these personal use tow bars are designed to be compact yet...

SP-TT50 Piper Black Tar Tape.  1/16 x 1 x 50'.  Used by Piper on many of the older windshield installations.

Piper Deluxe Tow Bar  SSU 018  Total Length:  collapsed - 30 1/2"/extended 46" This quality tow Bar fits the Piper Colt, Tri-pacer, Warrior, Archer, Tomahawk. Most fixed gear Cherokees, Aero Commander model 100 & Lark. This tow bar...

SSU-004 Total Length:  42 1/2" PA-24 Series These personal use tow bars are designed to be compact yet lightweight. Superior construction. quick release pull pins have made these economical tow bars the true "standard"

Piper J3 Stainless Screw Kit/Airframe Saves Time and Money! Makes annual inspections a lot easier - Your mechanic will love you. Clean Appearance without those unsightly rust marks Contains all the NON-STRUCTURAL trim screws

Piper PA22 Nose Strut Seal Kit  (TC22S-1)  This kit contains all the seals, o rings and gaskets to rebuild  Piper PA 22 Nose Gear oleo struts.  

Piper PA23 Nose or Main Strut Seal Kit  (TC23S-1)  This kit contains all the seals, o rings and gaskets to rebuild  Piper PA 23 Series Nose or Main Gear oleo struts.  (1 kit per strut)  

Piper PA28 & PA32 Main Strut Seal Kit  (TPMS-1)  This kit contains all the seals, o rings and gaskets to rebuild many Piper Main struts. For Piper Models- PA-28, 140, 150, 151, 160, 161, 180, 181 & 235, PA-32, 260 and 300

Piper PA28 & PA32 Nose Strut Seal Kit  (TCNS-1)  This kit contains all the seals, o rings and gaskets to rebuild many Piper Nose Gear oleo struts. For Piper Models- PA-28, 140, 150, 151, 160, 161, 180, 181 & 235, PA-32, 260 and 300

This kit is for Piper models PA 28 with the 456/015 shimmy damper. O-rings vary in each kit.

This kit is for Piper models PA 28-236. O-rings vary in each kit.

Piper PA28R & PA32R Main Strut Seal Kit  (TCRMS-1)  This kit contains all the seals, o rings and gaskets to rebuild many Piper Main Gear oleo struts. For PA28R-180, -200, PA32R-300, 301, 301T & PA32RT-300, 300T

Piper PA28R & PA32R Nose Strut Seal Kit  (TCRNS-1)  This kit contains all the seals, o rings and gaskets to rebuild many Piper Nose Gear oleo struts. For PA28R-180, -200, PA32R-300, 301, 301T & PA32RT-300, 300T

This kit is for the Piper PA 28R series with the SFA232-5 actuator. O-rings vary in each kit.

This kit is for the Piper PA 28R series with the 35797-05 actuator. O-rings vary in each kit.

This kit is for the Piper PA 28R series with the 35797-03 actuator. O-rings vary in each kit.

This kit is for Piper models PA 28R201 with the 456-016 shimmy damper. O-rings vary in each kit.

TP30NS-1 Piper PA30 PA39 nose and main strut kit. Our kit replaces the worn or torn O-rings and seals on the Piper  and PA39 nose and main struts.  (Note:  each kit does (1) one strut.)

This kit is for Piper models PA 31 with the 015-00100 shimmy damper. O-rings very in each kit.

TP34MS-1 Piper PA34 nose and main strut service kit. The TP34MS-1  strut service kit replaces worn or leaking O-rings on the PA34-200 and 200T Seneca I and II models Note:  Each kit does (1) strut

TP38NS-1 Piper PA38 nose and main strut service kit. The TP34NS-1  strut service kit replaces worn or leaking O-rings on the PA38 Note:  Each kit does (1) strut

This kit is for the Piper PA 44 series with the 96860-02 actuator. O-rings vary in each kit.