Instruments

Alcor 42525 EGT Lead  Extension  (90")  Type K (red and yellow) Resistance: 2.71 ± .06 Ω  

Piper Outside Air Temperature Gauge 550-541 Direct read with (F) and (C) temperatures.  Easily mounted in windshield or sheet metal

OAT or Carb Temp Electronics International's A-1 instrument provides pilots with the precision and stability needed in order to accurately monitor Outside Air Temperature or Carburetor Temperature while in-flight. Ice Zone Warning Not only will...

Alcor 46150-4   4 cylinder Kit with Gauge, Leads, and Probes This kit contains: (1) Alcor 46150 EGT Gauge (4) 90 inch egt extension leads (42525) (4)  86255 Type of probe is (K)  (red and yellow)  

Alcor 46150 EGT   Size is 2 1/4 inches Type of probe is (K)  (red and yellow) Weighs only 2oz Calibration scale to 1600F  

Alcor 46151 CHT Size:   2 1/2 inch Probe:  Type K (black and Yellow) Temperature:  500F

Alcor 86255 EGT Probe Type K (red and yellow)   Alcor EGT probes are accurate +/- 25 deg at 1500 deg F. Includes fire sleeve and ring terminal hardware Clamp 3 3/8 inch maximum

Overview The C-1 provides pilots with Cylinder Head Temperature readings in a stable, one-degree digital format. The large, crisp LCD is viewable in direct sunlight and is backlit, making it easy to monitor your CHT. Specifications Unit Size (H x W x...

Overview The C-2 provides pilots with an easy, cost-effective method of monitoring Cylinder Head Temperature on their twin aircraft. The instrument has two channels of CHT, one for each engine. For upgrades, see the Remote Switches section. ...

Overview Electronics International provides the budget-conscious pilot the option to monitor their Carburetor Temperature and Outside Air Temperature with the same precision found in the most advanced analyzers on the market, while not breaking the bank...

MUST GO UPS GROUND. IF ANOTHER SHIPPING OPTION IS SELECTED, YOU WILL BE CONTACTED IF ADDITIONAL PAYMENT IS NEEDED. THANK YOU. AP 1000  Compass fluid Refill your compass with high quality petroleum distillates formulated for your Airpath Compass...

Kit consists of diaphragm, compass correction card and face glass gaskets. Compass fluid available separately.  

Datcon Hour Meter (rectangular)   102033 Specs: 10-80 volts DC 4 x 3.32 x 3.32 IN Two hole mounting Front sealing Flat lens  We also have pressure switches  Click here for the link

Datcon Hour Meter (round)   100690=26 Specs: 12 or 24 volts DC 3.25 x 3.25 x 4 IN Four hole mounting Front sealing Flat lens  We also have pressure switches  Click here for the link

Part No. 100450 is a New Miniature Pressure Switch which is ruggedly built to permit fast, field installation. It is a compact, low-cost switch that features a snap action switch mechanism encased in a molded glass-filled nylon body for extreme shock and...

Overview SkySupplyUSA, along with Electronics International, provide the budget-conscious pilot the option to monitor their Exhaust Gas Temperature with the same precision found in the most advanced analyzers on the market, while not breaking the bank...

Overview The E-2 provides pilots with an easy, cost-effective method of monitoring Exhaust Gas Temperature on their twin aircraft. The instrument has two channels of EGT, one for each engine. For upgrades, see the Remote Switches section. ...

Overview Electronics International provides the budget-conscious pilot the option to monitor their Exhaust Gast Temperature, Cylinder Head Temperature and Outside Air Temperature with the same precision found in the most advanced analyzers on the...

Overview Electronics International provides the budget-conscious pilot the option to monitor their Exhaust Gas Temperature and Cylinder Head Temperature with the same precision found in the most advanced analyzers on the market, while not breaking the...

The 451-101 panel mount carbon monoxide detector is designed for FAA certified Part 23 aircraft, and Part 27 and Part 29 rotorcraft. Compact and lightweight, this CO detector requires little panel space and provides highly accurate CO detection. This...

Hobbs 76575 4 pressure switch This Hobbs pressure switch is designed to close the circuit when pressure exceeds 4 psi.  It is normally Open.  This unit is not for water applications.  1/8 " pipe thread.  

This Hobbs pressure switch is designed to close the circuit when pressure exceeds 4 psi.  It is normally Open.  This unit is not for water applications.  1/8 " pipe thread.  Replaces 76575 4.  

J6984-1 Instrument panel shock mount cross references to Cessna p/n 041159-1

Universal MM-111 (type K) EGT Probe MM-111 probe is FAA/PMA approved.  Designed for use with other manufacturer's applications using chromel alumei (type K) thermo couples.  To detemine if type -K is used, the probe lead wires will be color...

Type a description for this product here...

MS33737-11C Instrument Mounting Nut    Replacement for NAS487-15 These cage type mounting nuts are non-magnetic, made of copper alloy.  They are inserted into the instrument by gently compressing the legs and releasing to allow a firm fit...

MS33737-13C Instrument Mounting Nut    Replacement for NAS487-17 These cage type mounting nuts are non-magnetic, made of copper alloy.  They are inserted into the instrument by gently compressing the legs and releasing to allow a firm fit...

MS33737-15C Instrument Mounting Nut    Replacement for NAS487-20 These cage type mounting nuts are non-magnetic, made of copper alloy.  They are inserted into the instrument by gently compressing the legs and releasing to allow a firm fit...

MS33737-9C Instrument Mounting Nut    Replacement for NAS487-13 These cage type mounting nuts are non-magnetic, made of copper alloy.  They are inserted into the instrument by gently compressing the legs and releasing to allow a firm fit...

Type a description for this product here...

Outside Temperature Gauge 2716A    Aftermarket replacement for Piper and other manufacturers..

Description Upgrades any unit to read Twelve Channels of EGT or CHT Kit Includes 11 ea 6' Cables, 11 ea. Probes (Specify Probe Type)

Description: Upgrades any single-channel unit to read Four Channels of EGT or CHT   Kit Includes 3 ea. 6' Cables, 3 ea. Probes (Specify Probe Type)

Description Upgrades any two channels to read Four Channels of EGT and CHT Kit Includes 6 ea. 6' Cable,s 6 ea. Probes (Specify Probe Type)

Description Upgrades and Primary CHT/TIT unit to read Four Channels of EGT or CHT Kit Includes 4 ea. 6' Cables, 4 ea. Probes (Specify Type)

Description Upgrades any two primary channels to read Four Channels of EGT and CHT Kit Includes 8 ea. 6' Cable,s 8 ea. Probes (Specify Probe Type)

Description Upgrades any unit to read Six Channels of EGT or CHT Kit Includes 5 ea. 6' Cables, 5 ea. Probes (Specify Probe Type)

Description Upgrades any two channels to read Six Channels of EGT and CHT Kit Includes 10 ea. 6' Cables, 10 ea. Probes (Specify Probe Type)

Description Upgrades any primary CHT/TIT unit to read Six Channels of EGT or CHT Kit Includes 6 ea. 6' Cables, 6 ea. Probes (Specify Probe Type)

Description Upgrades any two primary channels to read Six Channels of EGT and CHT Kit Includes 12 ea. 6' Cables, 12 ea. Probes (Specify Probe Type)