ACID OR GLUE BRUSH 3/8" WIDE

Horse hair with metal handle. 3/8" wide.  Alternate Part Number #09-21400

AN Fittings Sleeve AN819-4D (Aluminum)

Tube O.D. 1/4" Aluminum - Blue

AN960C416 FLAT STAINLESS WASHER

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320...

AN960C416L FLAT STAINLESS WASHER

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320...

ECONOMY DIMPLE DIE 1/8" Set

For any .187 shank diameter squeezer.

MIL-H-5606A HYDRAULIC FLUID PINT WITH SCREW CAP

Mineral oil based hydraulic fluid for use with brake and hydraulic systems with synthetic rubber seals. Colored red. Meets MIL-H-5606A cleanliness requirements for aviation hydraulic...

MIL-H-5606A HYDRAULIC FLUID QUART WITH SCREW CAP

Mineral oil based hydraulic fluid for use with brake and hydraulic systems with synthetic rubber seals. Colored red. Meets MIL-H-5606A cleanliness requirements for aviation hydraulic...

STATIC WICK ESD-1 NON CERTIFIED

Physical Characteristics: Fully Qualified to MIL-D-9129D ESD-1 Static Wick Length: (including mounting base) 7.65 inches. (discharger element) 4.75 inches Distance between mounting holes: 1...

STATIC WICK ESD-3 NON CERTIFIED

Length: (Including mounting base) 7.65 inches. (discharger element) 4.75 inches Weight: Less than 5.5 grams Airspeed : 300 knots Temperature: +85°C to -55°C, MIL-STD-202C, Method 102A,...

STYROFOAM SMALL CELL 4" (24"x48" sheet)

Low density (2 lb./ft3). Tight closed cell structure leaves no voids between the cells which provides unequaled resistance to water penetration. Has excellent resistance to bases, salts, alcohols and...

TSDK-1 Beech SHIMMY DAMPENER REPAIR KIT

TSDK-1 Shimmy Dampener Repair Kits for Beech.  35-825145.

WOOD BRUSH - 1/2 INCH

Natural, undyed bristle with smooth, unpainted wood or polyethyel handles. Unaffected by paint, dopes, thinners or solvents. Alternate Part Number 09-21100

Airborne Vacuum Pump Repair Kit

  NO LONGER AVAILABLE   This FAA/PMA kit is for Airborne  pumps only.  Basic Kits include: Rotor Vanes Gasket Drive Coupling          ...

SCAT-2A (5/8")

SCAT-2A (5/8") Wire-supported aircraft quality ducting - silicone impregnated fiberglass. Temperature range -80f. To +550 f. Single wall.

SCAT-3 (3/4")

SCAT-3 (3/4").  : Wire-supported aircraft quality ducting - silicone impregnated fiberglass. Temperature range -80f. To +550 f. Single wall.