Aircraft Parts & Supplies

Cessna fuel strainer seal kit. For fuel strainers commonly found on Cessna models using the aluminum gasket and o rings. For most models pre 1998.

CESSNA NOSE GEAR FAIRING PLATE, 0743625-17

Cessna Nose Strut Seal Kit  (TCNS-1)  This kit contains all the O-rings, back up rings, scraper ring and washer to service the nose gear strut. Fits: 150, 152, 172, 172RG, 175, 177RG, 182, R182, 205, 206, 210, P210, T210, 310-3500 Thru 310Q,...

Cessna Nose Gear Strut torque link kit    fits the following aircraft:   Cessna 150, 152, 172, 172RG, 182, 206, 207, 210, 336, 337 AND T303.     Has all the required parts shown to rebuild the torque link except the...

Cessna Piper Grumman fuel primer kit. Our kit PPFSV30 to replace the o-rings in the fuel primer typically foound in Cessna, Piper and Grumman models

TCSDK208 Cessna 208 Shimmy Damper Rebuild Kit This kit is for the Cessna 208 Caravan Series

This kit is for Cessna models T182 with the 1442114-1 shimmy dampers. O-rings vary in each kit.

Cessna T303 nose strut kit. Our PPCT303NSSK comes with the O-rings and packings to return the nose strut to service on the Cessna T303 Crusader.

Cessna TU206G and U206G model fuel strainer seal kit. For fuel strainers  found on the new 206 models.

Cessna Wheel Pant Cover, P/N 1442200-6

Champion® M41E  Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Unshielded  Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm Picture of the plug is not  accurate - This is an unsheilded plug...

Champion® REB36S Single Fine Wire Iridium Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Shielded Threading: 5/8" - 20,  .016"-.021"/0.41-0.53 mm plug gap Click Here for the Champion Spark Plug Application Guide

Champion® REB37E Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Shielded Threading: 5/8" - 24 Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm Click Here for the Champion Spark Plug Application Guide

Champion® REL37B Standard Electrode Aviation Spark Plug. Thread size: 14 mm Reach: 1/2"/1.27 cm Shielded Threading: 5/8" - 24 Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm Click Here for the Champion Spark Plug Application Guide

Champion REM37BY Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Shielded Threading: 5/8" - 24 Standard Electrode: Twin Electrode Plug Gap: .016"-.021"/0.41-0.53 mm Click Here for the Champion Spark Plug Application Guide

Champion® REM38E Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Shielded Threading: 5/8" - 24 Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm  Don't forget T556 Spark Plug Thread Lube.   Click...

Champion® REM38S Single Fine Wire Iridium Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Shielded Threading: 5/8" - 24,  .016"-.021"/0.41-0.53 mm plug gap Click Here for the Champion Spark Plug Application Guide

Champion REM40E Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Shielded Threading: 5/8" - 24 Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm  Don't forget T556 Spark Plug Thread Lube.   Click...

(8 Plugs minimum for free shipping) Champion REM40E Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Shielded Threading: 5/8" - 24 Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm  Don't forget T556...

Champion RHB32E Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 13/16"/2.06 cm Shielded Threading: 3/4" - 20 Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm  Don't forget T556 Spark Plug Thread Lube. Click Here for...

Champion® RHB32 Single Fine Wire Iridium Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 13/16"/2.06 cm Shielded Threading: 3/4" - 20,  .016"-.021"/0.41-0.53 mm plug gap Click Here for the Champion Spark Plug Application Guide

Champion® RHB36S Single Fine Wire Iridium Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 13/16"/2.06 cm Shielded Threading: 5/8" - 20,  .016"-.021"/0.41-0.53 mm plug gapClick Here for the Champion Spark Plug Application Guide

Champion RHB37E Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 13/16"/2.06 cm Shielded Threading: 5/8" - 24 Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm Click Here for the Champion Spark Plug Application Guide

Champion RHM38E Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Shielded Threading: 3/4" - 20 Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm Click Here for the Champion Spark Plug Application Guide

Champion RHM40E Standard Electrode Aviation Spark Plug. Thread size: 18 mm Reach: 1/2"/1.27 cm Shielded Threading: 3/4" - 20 Standard Electrode: Two Prong Plug Gap: .016"-.021"/0.41-0.53 mm Click Here for the Champion Spark Plug Application Guide

Champion CH48103-1 oil filter Proven full size design, in use for 30 years. Magnetic secondary filtration system attracts steel particles too small to be caught in the filter media. Leaf spring technology for lateral stability of filter pack. Powder...

Champion CH48104-1 oil filter  Proven full size design, in use for 30 years. Magnetic secondary filtration system attracts steel particles too small to be caught in the filter media. Leaf spring technology for lateral stability of filter pack...

Champion CH48108-1 Proven full size design, in use for 30 years. Magnetic secondary filtration system attracts steel particles too small to be caught in the filter media. Leaf spring technology for lateral stability of filter pack. Powder coated finish...

Champion CH48109-1 oil filter  Proven full size design, in use for 30 years. Magnetic secondary filtration system attracts steel particles too small to be caught in the filter media. Leaf spring technology for lateral stability of filter pack...

Champion CH48110-1 Oil Filter     Champion-brand spin-on filters incorporate a semi-depth filter media. These filters combine the advantages of both surface and depth-type filtration: high filtering efficiency, controlled porosity for uniform...

Champion CH48111-1 oil filter  In 1974, the first Champion-brand spin-on filter was introduced. Today, Champion Aerospace distributes Champion-brand spin-on oil filters and element filters that incorporate a semi-depth filter media. These filters...

High-impact red plastic case contains 4 sets of accurate, retractable 'go' & 'no-go' wire gauges: 2 sets .015-.019 (.016 Nom.) 2 sets .018-.022 (.019 Nom.) 3.5"Long, Wt. 1.25 oz.

Spark Plug Gasket, 18mm Copper  Used on Champion Spark Plugs and Tempest with the following prefixes:  REM, RHM, RHB, REB UREM, URHM, URHB and UREB. Champion recommends periodic replacement of these gaskets at each annual inspection or after...

Champion M-677 Igniter Gasket

Features & Benefits Champion slick magnetos make timing, installation, inspection and maintenance simpler and more convenient than ever before, also incorporated mechanic-endorsed features to improve performance and service life Lift-off...

A high-temperature, graphited lubricant for application to spark plug installation threads to prevent galling and seizure. Sturdy plastic 4 fl. oz. bottle with brush attached to cap. Size: 5 5/8 in. X 7 1/4 in. X 5 1/4 in./14.4 X 18.4 X 13...

Champion/Slick 4301 Magneto,  New Exchange The Champion/Slick Magneto is a bolt-on replacement for previous Slick and most TCM/Bendix Magnetos. Champion/Slick Magnetos are FAA/PMA and OEM approved for Lycoming and TCM engine models… which...

  Champion/Slick 4330 Magneto New Exchange The Champion/Slick Magneto is a bolt-on replacement for previous Slick and most TCM/Bendix Magnetos. Champion/Slick Magnetos are FAA/PMA and OEM approved for Lycoming and TCM engine models… which...

  Champion/Slick 4347 Magneto  New Exchange The Champion/Slick Magneto is a bolt-on replacement for previous Slick and most TCM/Bendix Magnetos. Champion/Slick Magnetos are FAA/PMA and OEM approved for Lycoming and TCM engine models…...

Champion/Slick 4370 Magneto New Exchange The Champion/Slick Magneto is a bolt-on replacement for previous Slick and most TCM/Bendix Magnetos. Champion/Slick Magnetos are FAA/PMA and OEM approved for Lycoming and TCM engine models… which means...