Fuel System

PPGASKIT2 Commander 114 gascolator rebuild kit. The PPGASKIT2 replaces the fuel resistant o-rings on the Commander 114 with the 635060-501 gascolator.  For 114 sn. 14451 and Up, 114 sn. 20001 and Up.

Now FAA TSO-C76 Approved.Brass Fuel Valves, Push to Open, Non-Lock Open, Use Pin Type Cup.Use Curtis Drain Cup - CCA-39680.  Curtis Superior Valve is experienced in valve design and can help solve your valve problems. In most cases a standard...

Cessna T-50,Piper PA-11, PA-12, PA-18, PA-20, PA-22 or aircraft with 1/4" taper fittings. SPECIFICATIONS• Series: F391• Connection Type: NPT• Body Material: Brass• Mounting Type: Flush• Valve Action: Push-to-Open• Thread...

Maule Aircraft M-5 (210 Engine), M-5 (235 Engine), M-5 (180 Engine). M-5 (Turbo Charged Engine), or aircraft with 1/8" taper fittings. SPECIFICATIONS• Series: F391• Body Material: Brass• Mounting Type: Flush• Valve Action:...

Cessna 180, 182, 185, 188, 206, 207, or aircraft with 3/8" 24 threaded fittings SPECIFICATIONS• Series: F391• Body Material: Brass• Mounting Type: Flush• Valve Action: Push-to-Open• Thread Size: 3/8-24• Thread Type:...

Mooney M20J (201) and M20K (231) or aircraft with 7/16" 20 threaded fittings. SPECIFICATIONS• Series: F391• Body Material: Brass• Mounting Type: Flush• Valve Action: Push-to-Open• Thread Size: 7/16-20• Thread Type:...

Cessna 152, 172, 180, 185, 210, or aircraft with 7/16" Straight Thread. SPECIFICATIONS• Series: F391• Body Material: Brass• Mounting Type: Flush• Valve Action: Push-to-Open• Thread Size: 7/16-20• Thread Type: UNF•...

Cessna 206, 207, 210, or aircraft with 1/2" 20 Threaded Fittings. SPECIFICATIONS• Series: F391• Body Material: Brass• Mounting Type: Flush• Valve Action: Push-to-Open• Thread Size: 1/2-20• Thread Type: UNF• Suitable...

T10014-2 is the replacement fuel tank cap gasket on Cessna models. 2-1/4″ OD, 1-3/8″ ID and 1/8″ thick.

FUEL-152/12,  Fuelhawk Gauge C152/12GAL This is a Fuelhawk Cessna 152 Specific fuel gauge for a 12 Gallon tank capacity. J-Air Fuelhawk fuel sticks are designed to let you visually measure fuel in the tank. Fuel exhaustion is a leading cause of...

FUEL-172/19,  Fuelhawk Gauge C172/19GAL This is a Fuelhawk Cessna 172 Specific fuel gauge for a 19 Gallon tank capacity. J-Air Fuelhawk fuel sticks are designed to let you visually measure fuel in the tank. Fuel exhaustion is a leading cause of...

FUEL-172/26, Fuelhawk Gauge C172/26.5GAL This is a Fuelhawk Cessna 172 Specific fuel gauge for a 26 Gallon tank capacity. J-Air Fuelhawk fuel sticks are designed to let you visually measure fuel in the tank. Fuel exhaustion is a leading cause of general...

FUEL-182/39, Fuelhawk Gauge C182/39GAL This is a Fuelhawk Cessna 182 Specific fuel gauge for a 39 Gallon tank capacity. J-Air Fuelhawk fuel sticks are designed to let you visually measure fuel in the tank. Fuel exhaustion is a leading cause of general...

FUEL-182/43, Fuelhawk Gauge C182/43.5GAL This is a Fuelhawk Cessna 182 Specific fuel gauge for a 43 Gallon tank capacity. J-Air Fuelhawk fuel sticks are designed to let you visually measure fuel in the tank. Fuel exhaustion is a leading cause of general...

This is a Fuelhawk PA-28 Specific fuel gauge for a 24 Gallon tank capacity. J-Air Fuelhawk fuel sticks are designed to let you visually measure fuel in the tank. Fuel exhaustion is a leading cause of general aviation accidents. Don't let your students or...

T308-2 gascolator gasket is 2-1/4″ OD and 3/32″ thick Meets MIL-R-6855-1 spec.   neoprene material

T308-25 gascolator gasket is 2-1/8″ OD and 3/32″ thick Meets MIL-R-6855-1 spec.   neoprene material

T308-30 gascolator gasket is 2″ OD and 3/32″ thick. Meets MIL-R-6855-1 spec.   neoprene material

The 12oz. Gats Jar fuel testers are used to collect, pre flight inspection, fuel samples. It then separates any co-mingled fuel and water, by allowing only the fuel to be poured back into the tank through our special built-in filter which traps the water...

The 16oz. Gats Jar fuel testers are used to collect pre flight inspection fuel samples. It then separates any co-mingled fuel and water, by allowing only the fuel to be poured back into the tank through our special built-in filter which traps the water...

Replacement fuel sump actuator for the GATS Jar Fuel Tester.

FUEL-UNI/11, J-Air Universal Fuelhawk Gauge 11 inch FUEL-UNI/11. Universal Fuelhawk Gauge 11 inch This is a 11" fuel gauge for use in a wide variety of aircraft. J-Air Fuelhawk fuel sticks are designed to let you visually measure fuel in the tank. Fuel...

Push and Twist to Lock Open - FAA Approved under TSO-C76

Push and Twist to Lock Open - FAA Approved under TSO-C76

Push and Twist to Lock Open - FAA Approved under TSO-C76

Push and Twist to Lock Open - FAA Approved under TSO-C76

For Cessna 310 Tip Tanks, Mooney Mark 20 and 20A, all Ercoupe Models, Bellanca, Taylorcraft Model B, Stinson 108, 108-1,108-2 and 108-3, Voyager Model 10 and 10A, Navion,Waco VK Series and UPF SEA BEE and more

For Piper Models PA-11, -12, -18, -20, -22 Tri-Pacer, Apache, Champion, Aeronica, Cessna T-50 and Earlier 120 and 140 Models, Beechcraft AT-11 and C18S

For all Cessna Late 140 Models, 150,170,172,175, and more

Type a description for this product here...

PPGASKIT3 A-1540-10 / 1540-3 Mooney M20J gascolator kit. Fits M20J and other models with the A-1540-10 or 1540-3 gascolator.

SPECIFICATIONS• Series: MS29513• Inside Diameter: 0.176 in• Outside Diameter: 0.312 in• Thickness: 1/16 in• Durometer: 70 Shore A• Temperature Rating: -65 to 200 deg F• Material: Acrylonitrile Butadiene Rubber•...

SPECIFICATIONS• Series: MS29513• Inside Diameter: 1.173 in• Outside Diameter: 1-15/16 in• Thickness: 3/32 in• Durometer: 70 Shore A• Temperature Rating: -65 to 200 deg F• Material: Acrylonitrile Butadiene Rubber•...

SA14 Flush Drain Valve Direct replacement for F391-14 FAA PMA approved SA14 (1/4 NPT) Flush-Mounted Fuel Drain Valves SAF-AIR Products, Inc. designed its line of flush-mounted fuel drain valves to be an exact replacement for the Auto Valve...

SA18 Flush Drain Valve Direct replacement for F391-18 FAA PMA approved SA18 (1/8 NPT) Flush-Mounted Fuel Drain Valves SAF-AIR Products, Inc. designed its line of flush-mounted fuel drain valves to be an exact replacement for the Auto Valve...

SA32 Flush Drain Valve Direct replacement for F391-32 FAA PMA approved SA32 (3/8-24) Flush-Mounted Fuel Drain Valves SAF-AIR Products, Inc. designed its line of flush-mounted fuel drain valves to be an exact replacement for the Auto Valve...

SA53S Flush Drain Valve Direct replacement for F391-53S FAA PMA approved SA53S (7/16-20) Flush-Mounted Fuel Drain Valves SAF-AIR Products, Inc. designed its line of flush-mounted fuel drain valves to be an exact replacement for the Auto...

SA72 Flush Drain Valve Direct replacement for F391-32 FAA PMA approved SA72 (7/16-20) Flush-Mounted Fuel Drain Valves SAF-AIR Products, Inc. designed its line of flush-mounted fuel drain valves to be an exact replacement for the Auto Valve...

SA72 Flush Drain Valve Direct replacement for F391-32 FAA PMA approved SA82 (1/2-20) Flush-Mounted Fuel Drain Valves SAF-AIR Products, Inc. designed its line of flush-mounted fuel drain valves to be an exact replacement for the Auto Valve...

This MS29513-338 O ring is the large one that fits the the fuel cap assembly. Fits the following caps:  431 and 531 only Outside Diameter -  3.486 - 3.554 Inside Diameter -    3.085 - 3.115 Thickness -  0.205 - 0.215 The...