Eastman 2380 Turbine Oil (Case of 24 Quarts). Eastman Turbo Oil 2380 is a 5 cSt synthetic lubricant that is approved against US military specification MIL-PRF-23699F-STD, and UK specification DEF STAN 91-101/2 (replaced DERD 2499). This lubricant provides a balanced combination of thermal and oxidation stability, load carrying capacity, lower volatility and has the best low temperature flow characteristics of all 5 cSt turbine oils
Formerly called BP 2380 turbine oil
Click for Eastman 2380 MSDS
Click for Eastman 2380 TDS
Save on Oil filters! Click here for Champion and Tempest Oil Filters
| Typical Properties |
| Property |
Test
Method |
Typical Value, Units |
| Density @ 15°C |
ASTM D 1298 |
0.9749 kg/L |
| Viscosity, Kinematic |
|
|
ASTM D 445 |
4.97 mm2/s |
|
|
ASTM D 445 |
24.2 mm2/s |
|
|
ASTM D 2532 |
7,950 mm2/s |
| Pour Point |
ASTM D 97 |
-57°C |
| Flash Point |
ASTM D 92 |
265°C |
| Total Acid Number |
SAE ARP5088 |
0.43 mg KOH/g |
| Evaporation Loss 6.5 hrs @ 204°C |
ASTM D 972 |
3.0% |
| Foaming Volume |
|
|
ASTM D 892 |
9/0 ml/vol |
|
|
ASTM D 892 |
8/0 ml/vol |
|
|
ASTM D 892 |
8/0 ml/vol |
| Load Carrying Ability a |
|
|
IP 166 |
99% |
|
|
IP 166 |
86% |
| Rubber Swell |
| |
Nitrile Rubber (192 hrs @ 130°C) |
|
DERD Test, Method 4 |
10.5% |
| |
Viton Rubber (192 hrs @ 200°C) |
|
DERD Test, Method 4 |
22.5% |
| |
Silicone Rubber (192 hrs @ 175°C) |
|
DERD Test, Method 4 |
10.5% |
| |
Viton LCS Rubber (192 hrs @ 200°C) |
|
DERD Test, Method 4 |
14% |
