Pilot Supplies

FUEL-UNIXL/16, Universal Fuelhawk Gauge XL 16 inch This is a 16" fuel gauge for use in a wide variety of aircraft. J-Air Fuelhawk fuel sticks are designed to let you visually measure fuel in the tank. Fuel exhaustion is a leading cause of general...

This is a 26" fuel gauge for use in a wide variety of aircraft. J-Air Fuelhawk fuel sticks are designed to let you visually measure fuel in the tank. Fuel exhaustion is a leading cause of general aviation accidents. Don't let your students or customers...

US IFR/VFR Low Altitude planning chart is designed for pre-flight and enroute flight planning for IFR/VFR flights. The chart is printed front-East and back-West. Information includes the depiction of low altitude LF/MF and VHF airways and mileages, low...

US IFR/VFR Low Altitude planning chart is designed for pre-flight and enroute flight planning for IFR/VFR flights. The chart is printed front-East and back-West. Information includes the depiction of low altitude LF/MF and VHF airways and mileages, low...

PLACARD T-028. Warning: Only the PILOT. Placards made from a .007" mylar material. This material is extremely durable and allows the placards to conform to almost any surface with a simple peel & stick installation. Measures 1.25" x 3.75"

SAC-Washington.  Washington Sectional Chart.

IFR Enroute Low Altitude Charts, Eastern U.S., provides aeronautical information for navigation under instrument flight rules below 18,000 feet MSL Western U.S. Set - L1/2 - L19/20 and Area Charts

The wheel chocks are approximately 2 1/2" tall, 4 1/2" wide, and 14" long, connected with a 1/4" X 18" braided nylon rope. The chocks are made from Norway pine, weigh about 2 lbs. and are coated with a protective, safety yellow paint.

SAC-WICHITA.  Wichita Sectional Chart.

This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water repellant.  High quality, good...

Throat diameter-10" Length 3.5' (42"). This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated polyester.  High quality, good visibility...

Windcone 18" Nylon Windsock This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water...

Throat diameter-18"; end diameter-9"; length-8' (96"). This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated polyester.  High quality,...

The premium 18” diameter windsock frame is easy to assemble and install. The lightweight design allows the frame to rotate easily even in light wind. The 18” windsock frame is fabricated powder coated steel for maximum durability...

This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water repellant.  High quality, good...

Throat diameter-12" Length 4' (48").   This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated polyester.  High quality, good...

Windcone 18" Nylon Windsock This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water...

Windcone 18" Vinyl Windsock Throat diameter-18"; length-4' (48"). This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated polyester. ...

Windcone 18" Nylon Windsock This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water...

Windcone 18" Vinyl Windsock Throat diameter-18"; length-5' (60"). This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated polyester. ...

Windcone 20" Nylon Windsock This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water...

Windcone 20" Vinyl Windsock Throat diameter-20";  length-8' (96"). This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated polyester...

Windcone 22" Vinyl Windsock This windsock works well in most environments. It is constructed using Vinyl - This is a light weight (6 oz.), easily inflatable material that is UV coated.  Throat diameter-22";  length-8' (96").  High...

Windcone 24" Nylon Windsock This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water...

Windcone 24" Nylon Windsock Throat diameter-18"; end diameter-9"; length-8' (96"). This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated...

Windcone 28" Nylon Windsock This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water...

Windcone 28" Vinyl Windsock Throat diameter-28";  length-8' (96"). This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated polyester...

Windcone 36" Nylon Windsock This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water...

Windcone 36" Vinyl Windsock Throat diameter-36";  length-12' (144"). This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated...

Windcone 6" Nylon Windsock This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water...

Windcone 6" Vinyl Windsock This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated polyester.  High quality, good visibility and durable...

Windcone 8" Nylon Windsock This windsock works well in most environments. It is constructed using Nylon - This is a light weight (6 oz.), high density polyurethane coated nylon fabric, easily inflatable material that is UV coated and water...

Windcone 8" Vinyl Windsock This windsock works well in coastal environments. It is constructed using Vinyl - This is a light weight (9 oz.), highly visible material of fluorescent vinyl-coated polyester.  High quality, good visibility and durable...

Windsock Frame  (6") The 6"-10" frames are constructed of powder coated steel for maximum durability and designed to be light weight for ease of maneuverability in light winds.  Frame kits include a mounting collar that is designed to fit over...

Windsock Frame  (6") The 6"-10" frames are constructed of powder coated steel for maximum durability and designed to be light weight for ease of maneuverability in light winds.  Frame kits include a mounting collar that is designed to fit over...

Windsock Frame  (6") The 6"-10" frames are constructed of powder coated steel for maximum durability and designed to be light weight for ease of maneuverability in light winds.  Frame kits include a mounting collar that is designed to fit over...

Windsock Frame  (6") The 6"-10" frames are constructed of powder coated steel for maximum durability and designed to be light weight for ease of maneuverability in light winds.  Frame kits include a mounting collar that is designed to fit over...

PLACARD T-019. Zero Fuel Weight. Placards made from a .007" mylar material. This material is extremely durable and allows the placards to conform to almost any surface with a simple peel & stick installation. Measures 1.25" x 3.75"