Description

CS2-TALL

Center Section 2 -Tall. Designed to carry 15" laptops as well as tablets, documents, folders, clipboards or posse box.

This item does not include a Main Handle or Shoulder Strap. If building a custom bag, make sure your order includes one or both.

The CS2-Tall is designed for carrying 15" laptops, iPads etc.

This center section is 15” x 10.5” x 2" and it can attach to all of the FLEX System modules including other center sections.

This item does not include a Main Handle or Shoulder Strap. If building a custom bag, make sure your order includes one or both.

The CS2-Tall can be used in any configuration and is not designed to be used by itself due to the possibility of damaging the exposed zippers. You will always want to have something (either another module or an End Cap) zipped onto both sides of the CS2-Tall to protect the zippers.

NOTE: This Center Section opens towards the rear. See the additional image in the GALLERY tab. The CS2-Tall was designed to be a secondary Center Section in a configuration that included the CS4 as the primary Center Section. This means the CS4 has the POCKET CAP FRONT attached to its front surface and the CS4 opens towards the front. Therefore, since the CS2 is attached to the CS4, then the CS2-Tall is set up to open towards the rear. The FLAT CAP REAR will most commonly be attached to the rear surface of the CS2-Tall. The point being, that if you use the CS2-Tall by itself (like in the B2 COMPUTE), the POCKET CAP FRONT will indeed be attached to the front surface of the CS2-Tall, but the opposite surface (the rear surface) is the one that acutally has the cover panel that opens up the compartment and this rear cover panel will typically have the FLAT CAP REAR attached to it.

The CS2-Tall can be added to any configuration to add roughly an extra two inches of storage for your 15" laptop or other similarly-sized objects. Simply zip the CS2-Tall into a B0 Slim to create a B2-Tall, or added to B4, B6, B7, B18 to get added storage for your 15" laptop, iPad, or folders and documents.

The CS2-Tall is padded on all sides. It is an adequate amount of padding for basic protection. It is not heavily padded, so you'll want to carry sensitive items with a normal amount of care.

Details

Specifications:

This center section is 15” x 10.5” x 2" and it can attach to all of the FLEX System modules including other center sections.

Warranty

BrightLine Bags, Inc. offers a 3 Year Conditional Warranty on its products. This means we will repair or replace any bag with a problem or a failure caused by a defect in material or manufacturing that occur during normal use for up to 3 years from purchase. Normal use will of course lead to normal wear and tear (with no resulting unexpected problems or failures) and this is indeed “normal”, so normal wear and tear is not covered by this Warranty, but manufacturing or material defects are. Obviously we can’t be expected to cover problems or failures caused by abnormal use of the bag. Abnormal use would include, but is not limited to: wear caused by dragging behind roller luggage on a J-hook or strap, over-loading the bag or over-stuffing pockets or compartments, shoving the bag into and out of cramped spaces, etc. We want you to be happy with your bag and we will do what it takes to make sure you are. We trust that you know the difference between problems that WE should be responsible for, and things that YOU should be responsible for. If you say it's a defect, we won't argue. We'll take care of you. We recognize that we might even get taken advantage of occasionally, but we'd rather be too helpful than not helpful enough. If your bag has manufacturing or material defects that have occurred during normal use, please contact us at info@brightlinebags.com. You’ll also find a link on this page that will take you to our Warranty Form. If you can take a picture of the problem, it will help a lot. Also, find the 1-inch square white info tag inside the troubled component and take a picture of that too. That will help us make sure we know which part we’re dealing with. When you send photos, PLEASE USE "MEDIUM" SIZE. (Help us keep the email file size to a minimum.) Please be as detailed about your problem as you can. Also, please indicate when and where you purchased your BrightLine Bag. In most cases, if a replacement part is determined to be the proper course, we’ll send you a replacement part along with a pre-paid return label. You can just put the failed component in the same box and send it back to us. We know you can’t afford to have any down-time with your bag.